Event ID - ASA-3-114007

Message CodeASA-3-114007
SeverityError
DescriptionFailed to get current msr in 4GE SSM I/O card (error error_string).
Explanation"This message is displayed when the system fails to get port statistics in an 4GE SSM I/O card due to an I2C error or a switch initialization error.
syslog_id—Message identifier
error_string—Describes either an I2C serial bus error or a switch access error, which is a decimal error code. The following are the I2C serial bus errors:
• I2C_BUS_TRANSACTION_ERROR
• I2C_CHKSUM_ERROR
• I2C_TIMEOUT_ERROR
• I2C_BUS_COLLISION_ERROR
• I2C_HOST_BUSY_ERROR
• I2C_UNPOPULATED_ERROR
• I2C_SMBUS_UNSUPPORT
• I2C_BYTE_COUNT_ERROR
• I2C_DATA_PTR_ERROR"
User ActionPerform the following steps:
1. Log and review the messages and the errors associated with the event.
2. Reboot the software running on the system.
3. Power cycle the box. When you turn off the power, make sure you wait several seconds before turning the power on.
4. If the problem persists, contact Cisco TAC.
Reference Links

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.