Event ID - 30018

Event Id	30018
Source	Microsoft-Windows-RasRoutingProtocols-IPRIP2
Description	IPRIPv2 was unable to add a route to the routing table manager. The route is to network: %1 with next-hop: %3. The data is the error code.
Event Information	According to Microsoft : Cause : This event is logged when IPRIPv2 was unable to add a route to the routing table manager. Resolution : Check TCP/IP settings or add a route to Routing Table Manager Possible resolutions: Check whether there are any communication problems due to incorrect TCP/IP settings. Using administrator credentials, run the ipconfig command in a command prompt to view the TCP/IP configuration information. If the TCP/IP configuration information is correct, then use the netstat -a command to show the status of all activity on TCP and UDP ports on the local computer. Use the netsh routing ip add rtmroute command to add a route to the Routing Table Manager (RTM). Verify : To perform this procedure, you must have membership in Administrators , or you must have been delegated the appropriate authority. To verify that the RTM route has been added: Stop and restart the Routing and Remote Access service. Click Start , click Run , type rrasmgmt.msc , and then press ENTER. Open Routing and Remote Access. In the console tree, click Server Status. In the details pane, right-click a server name, point to All Tasks , and click Restart . View the routing table. In the Routing and Remote Access snap-in, expand IPv4 or IPv6 , right-click Static Routes , and then click Show IP Routing Table . Verify that the route has been added.
Reference Links	Event ID 30018 from Source Microsoft-Windows-RasRoutingProtocols-IPRIP2

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught