Event ID - 1

Event Id1
SourceTPM
DescriptionUpon entering S3/S4, the TPM_SaveState command failed.
Event InformationAccording to Microsoft :
Cause :
This event is logged when Upon entering S3/S4, the TPM_SaveState command failed.
Resolution :
Restart the computer
In order to perform operations correctly, an application that uses the Trusted Platform Module (TPM) must be able to communicate correctly with the TPM, using the application programming interfaces (APIs) or Windows Management Instrumentation (WMI) providers that, in turn, rely on the TPM Base Service (TBS), which uses the TPM driver. The ability to share the TPM between multiple components and applications requires that all such components and applications are written to use the APIs and WMI providers correctly.
Some applications may provide a method to retry the particular operation. If such an option or command is not available, or does not resolve the issue, restart the computer.
If problems continue after restarting the computer, investigate any software applications using the TPM, particularly if new applications have been installed. Details are provided in the event log entries to assist software developers in troubleshooting problems in their applications.
It is also possible that the TPM hardware may be malfunctioning.
Verify :
In order for the TPM driver to function correctly, the TPM must be correctly recognized by Windows.
To perform these procedures, you must have membership in Administrators, or you must have been delegated the appropriate authority.
To verify that the TPM is correctly recognized by Windows:
1.Open Device Manager.
2.Expand Security Devices.
3.If the Trusted Platform Module version 1.2 is not present under Security Devices, or if Security Devices is not shown as a category, your computer might not have a TPM version 1.2, or the computer is unable to recognize the TPM.
4.Right-click on the Trusted Platform Module 1.2, and then click Properties.
5.In the Trusted Platform Module 1.2 Properties window, look at the device status on the General tab. The status should indicate "This device is working properly."
If the TPM is correctly recognized by Windows, then you can also verify that the TPM driver is operating correctly.
To verify that the TPM driver is operating correctly:
1.Click Start, type tpm.msc in the Start Search box, and then press ENTER.
2.If the User Account Control window appears, click Continue.
3.In the TPM Management on Local Computer window, examine the Status section. The status should indicate "The TPM is on and ownership has been taken."
Note: Other application software may also make use of the TPM driver. Consult the documentation supplied with each application for steps to verify the correct operation.
Reference LinksEventID 1 from TPM

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.