Event ID - 11181

Event Id11181
SourceDnsApi
DescriptionThe system failed to update and remove registration for the network adapter with these settings: Adapter Name: %1 Host Name: %2 Adapter-specific Domain Suffix: %3 DNS server list: %4 Sent update to server: %5 IP Address(es): %6 The DNS server that was sent the update failed the update request. A possible cause of this failure is that the DNS server that is required to process this update request has a lock in place on the zone, probably because a zone transfer is in progress. You can retry DNS registration of the network adapter and its settings by typing ""ipconfig /registerdns"" at a command prompt. If the problem persists, contact your network administrator.
Event Information According to Microsoft :

Cause :

This event is logged when the system failed to update and remove registration for the network adapter.

Resolution :

Retry DNS registration

When your computer is assigned a new network address automatically, it attempts to notify the DNS server of the change of address. A problem occurred when your computer made this attempt. Often, this is a transient condition, although it can indicate a problem with the DNS server. This condition rarely causes problems for your computer unless you share resources such as folders or printers.

Although it is not necessary, you can direct your computer to retry the DNS registration.

To perform this procedure, you must have membership in Administrators , or you must have been delegated the appropriate authority.

To register your computer's address with the DNS server:
  1. On the DNS client computer, open a command prompt. To open an elevated Command Prompt window, click Start , point to All Programs , click Accessories , right-click Command Prompt , and then click Run as administrator .
  2. At the command prompt, type ipconfig /registerdns , and then press ENTER.
If the problem persists, contact your network administrator and provide the information in the event message.

Verify :

Use the ipconfig /registerdns command to register the computer's network name and address with a DNS server and then check the event log for errors.

To perform this procedure, you must have membership in Administrators , or you must have been delegated the appropriate authority.

To register the computer's network name and address with a DNS server:
  1. On the DNS client computer, open a command prompt. To open an elevated Command Prompt window, click Start , point to All Programs , click Accessories , right-click Command Prompt , and then click Run as administrator .
  2. Type the following command, and then press ENTER: ipconfig /registerdns .
Wait 15 minutes, and then check the event log to verify that a DNSapi event with an ID in the range 11180 through 11197 was not logged after you ran the command.
Reference LinksEvent ID 11181 from DnsApi

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.