Event ID - 108

Event Id108
SourceS3Psddr
DescriptionThe driver s3gnb for the display device \Device\Video0 got stuck in an infinite loop. This usually indicates a problem with the device itself or with the device driver programming the hardware incorrectly. Please check with your hardware device vendor for any driver updates.
Event InformationCAUSE:
This issue may occur if the display driver is caught in an infinite loop while it waits for the video hardware to become idle. This issue typically indicates a problem with the video hardware or that the display driver cannot program the hardware correctly.
RESOLUTION:
To resolve this issue, obtain and install the most current driver for your video adapter, or replace your video card.

To work around this issue, follow these steps:
1. Click Start, click Control Panel, and then double-click Display.
2. On the Settings tab, click Advanced, and then click the Troubleshoot tab.
3. Move the Hardware Acceleration slider to None, and then clear the Enable Write Combining check box.
4. Click OK, and then click OK.
For more information click on the link given below to a Microsoft article.
Reference LinksMore Information

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.