Event ID - 1008

Event Id1008
DescriptionYour computer was unable to initialize a Network Interface attached to the system. The error code is: %1.
Event InformationAccording to Microsoft :
Cause :
This event is logged when computer was unable to initialize a Network Interface attached to the system.
Resolution :
Configure the DHCP client network interface
Communication between the DHCP client computer and the DHCP server computer depends on proper configuration of TCP/IP.
To perform these procedures, you must be a member of the Administrators group, or you must have been delegated the appropriate authority.
To configure TCP/IP:
1.Click Start, right-click Network, and then click Properties.
2.Under Tasks, click Manage network connections.
3.Right-click the network connection you want to configure, and then click Properties.
4.On the Networking tab, click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
5.Click Obtain an IP address automatically.
6.Click Obtain DNS server address automatically, and then click OK.
Verify :
To verify that address conflicts have been resolved:
1.At the DHCP-enabled client computer, click Start, in Start Search type cmd, and then press ENTER.
2.To verify a DHCP client lease, type ipconfig /all to view lease-status information.
3.The output of the ipconfig command should show an IPv4 or IPv6 address marked "preferred."
Reference LinksEvent ID 1008 from Microsoft-Windows-DHCP-Client

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.