Event ID - 9

Event Id9
SourceiScsiPrt
DescriptionTarget did not respond in time for a SCSI request. The CDB is given in the dump data
Event Information According To Microsoft

This event is logged when the target did not complete a SCSI command within the timeout period specified by SCSI layer. The dump data will contain the SCSI Opcode corresponding to the SCSI command. User can refer to SCSI specification for getting more information about the SCSI command.
  1. On the Windows system, click Start , click Run , type regedit and press Enter. WARNING: As serious problems might occur if you modify the registry incorrectly.
  2. In HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Disk, edit or add the TimeOutValue entry to set it to 60 seconds in decimal format (0000003c in hexadecimal).

    To edit the value for the TimeOutValue entry if it already exists, double-click the entry, enter the new value, and click OK.

    To add the TimeOutValue entry if it does not yet exist, right-click anywhere in the list of values, and then click New > DWORD value. Name the new value TimeOutValue, and then double-click it to edit the setting.
Reference LinksMicrosoft iSCSI Software Initiator 2.x Users Guide

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.
 Refresh