| Event Id | 94 |
| Source | Microsoft-Windows-NLB |
| Description | NLB cluster [%2]: NLB failed to update the adapter multicast list. The cluster will converge and operate normally but some client traffic might not be handled. To attempt to update the adapter multicast list again, run 'nlb reload' from a command prompt. |
| Event Information | According to Microsoft : Cause : This event is logged when NLB failed to update the adapter multicast list. Resolution : Disable and re-enable NLB network adapters When the Network Load Balancing (NLB) driver fails to attach to the network adapter or fails to register with the Network Driver Interface Specification (NDIS), the host will not be an active member of the NLB cluster. You should disable and re-enable the network adapter before attempting to bind NLB to the adapter again. Membership in the local Administrators group, or equivalent, is the minimum required to complete this procedure. To disable and re-enable all network adapters: 1.Open Network and Sharing Center, and then click Manage network connections. 2.Right-click the network adapter you want to disable, and click Disable. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. 3.Right-click the network adapter you want to enable, and click Enable. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. Verify : When you are using nlb.exe, you must be a member of the Administrators group on the host that you are configuring, or you must have been delegated the appropriate authority. If you are configuring a cluster or host by running nlb.exe from a computer that is not part of the cluster, you do not have to be a member of the Administrators group on that computer. To verify that the network adapters are properly configured: 1.Open an elevated Command Prompt window. Click Start, point to All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. 2.Type nlb.exe query, which displays the current cluster state and the list of host priorities for the current members of the cluster. 3.Type nlb.exe display, which displays details on the current cluster configuration and the IP configuration on the host operating system and the network adapter. Verify the configuration of the network adapter. |
| Reference Links | Event ID 94 from Source Microsoft-Windows-NLB |
Catch threats immediately
We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.