| Event Id | 7 |
| Source | Disk |
| Description | The device, \device\harddisk0\partition2, has a bad block. |
| Event Information | According to Microsoft:From the command prompt, run the Chkdsk utility with the /r option on the named partition. If
Chkdsk reports no errors but you continue to receive this message, run hardware diagnostics on the disk drive named in the
message and on its controller. You might need to contact the vendor of the device for technical support, and you might have
to replace the controller, the disk drive, or both. ------------------------------------------------------------------------------------------- As per Microsoft:This event might be logged when you format a logical disk on an extended partition on an ATAPI hard disk drive on a Microsoft Windows NT 4.0-based computer.A supported hotfix is available from Microsoft,For HotFix information go to Article MS817755 in reference link. ------------------------------------------------------------------------------------------- As per Microsoft:you need to translate the hard disk number to a physical drive on the system. You can determine the hard disk number by looking in the registry, but you need to know if you are using IDE drives, SCSI drives or a combination of the two. Disk Administrator will display the drives in the order they are enumerated on each controller and in the order that the controller device drivers are loaded. If you are using multiple controllers, the order in which they are identified is based on I/O port and controller BIOS address assignments.For more information go to MS Article MS159865 in reference link. |
| Reference Links | MS817755 MS159865 |
Catch threats immediately
We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.