Event ID - 57

Event Id57
SourceMicrosoft-Windows-PrintSpooler
DescriptionThe document failed to print because the user did not have the necessary privileges.
Event Information According to Microsoft :

Cause :

This event is logged when the document failed to print because the user did not have the necessary privileges.

Resolution :

Restart the Print Spooler service or reinstall the printer driver

To resolve this error, try again to print the document. If this fails, use the procedures in this topic to do the following:
  • Delete the print job and restart the Print Spooler service.
  • Reinstall the printer driver.
  • Install an updated printer driver.
Delete the print job and restart the Print Spooler service

To delete the failed document and restart the Print Spooler service, use the two procedures in this section.

Warning : Restarting the Print Spooler causes all print jobs to be restarted. After restarting the Print Spooler service, you might need to either reset some printers or turn them off and then turn them on again. On an active print server, perform this procedure outside of normal business hours or during scheduled maintenance time, if possible. Before using this procedure, take all printers offline and wait for all print jobs to be completed, or pause all printers and wait for all print jobs with Active status to be completed.

To delete a failed print job and restart the Print Spooler service:
  1. In the Printers folder in Control Panel or the Print Management snap-in, double-click the printer you want to use, select the print job you want to delete, and then press DELETE.
  2. In the Administrative Tools folder, open the Services snap-in, select Print Spooler , and then click the Restart Service toolbar button.
Note : You can also do this from an elevated Command Prompt window by typing net stop spooler && net start spooler at the command prompt. (To open an elevated Command Prompt window, click Start , point to All Programs , click Accessories , right-click Command Prompt , and then click Run as administrator .)

In some instances, you might receive Error 1068 – "The dependency service or group failed to start" – when attempting to start the Print Spooler. This can happen if the Print Spooler service relies on other services that are not running. To resolve this issue, use the following procedure.

To verify or change the Startup setting for individual services (dependencies):
  1. In the Services snap-in, right-click Print Spooler and then click Properties .
  2. Click the Dependencies tab. The first box lists all of the system services that must be running for print spooler to start. These services are the dependencies.
  3. Make a note of each service, click OK , and then start each service that the Print Spooler service depends on, if the service is not already started. If a particular service was not started, right-click it, click Properties , and then confirm that the Startup type is set to Automatic .
Reinstall the printer driver

To reinstall the printer driver:
  1. In the Administrative Tools folder, open the Print Management snap-in with administrative permissions, right-click the appropriate print server, and then click Server Properties .
    Alternatively, open the Printers folder, right-click a blank area, click Run as administrator , and then click Server Properties .
  2. Click the Drivers tab, select the driver you want to reinstall, and then click Reinstall .
  3. After Windows finishes reinstalling the driver, print the document again.
Install an updated printer driver

Obtain an updated printer driver (from the printer vendor) that displays the Designed for Windows logo, install it on the client computer by following the instructions provided with the printer driver, and then print the document again.

Verify :

To verify that the print server is functioning properly, retry printing and then inspect the printed document to confirm that it printed correctly.

Note : If the print server logs spooler information events, Windows logs Print Spooler Event 10 after each successful printing operation.
Reference LinksEvent ID 57 from Source Microsoft-Windows-PrintSpooler

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.
 Refresh