Event ID - 5150

Event Id5150
SourceMicrosoft-Windows-WAS
DescriptionThe request for protocol %1 to configure application %3 in virtual site %2 failed. The virtual site will be disabled because the protocol cannot configure the application. The data field contains the error number.
Event Information According to Microsoft :

Cause :

This event is logged when the request for protocol to configure application in virtual site failed.

Resolution :

Stop and restart a virtual site

On startup, WAS reads information from the ApplicationHost.config file. Part of the information that WAS reads is application configuration, such as enabled protocols and the application pools for the application. For applications to be configured correctly, there must be clear communication between WAS and the protocol for the application. Stopping and starting a site can reestablish this communication.

To perform this procedure, you must have membership in Administrators , or you must have been delegated the appropriate authority.

To stop and restart the virtual site:
  1. Click Start , click Control Panel , and then click Administrative Tools .
  2. Right-click Internet Information Services (IIS) Manager and select Run as administrator .
  3. In the IIS Manager Connections Pane , expand the computer name.
  4. Expand Sites .
  5. Select the Web site that has to be restarted.
  6. In the Actions pane, click Stop to stop the site.
  7. In the Actions pane, click Start to start the site.
Verify :

To verify that a Web site is started, you can use either IIS Manager or the appcmd command line utility.

To perform these procedures, you must have membership in Administrators , or you must have been delegated the appropriate authority.

To verify that the Web site is started by using the appcmd command line utility:
  1. Open an elevated Command Prompt window. Click Start , point to All Programs , click Accessories , right-click Command Prompt , and then click Run as administrator .
  2. Change the directory to %SystemDrive%\Windows\System32\inetsrv .
  3. Run the following command: appcmd.exe list site -site.name:"Site Name" . If the Web site is started, the output will resemble the following:

    SITE "Default Web Site" (id:1,bindings:http/*:80:,state:Started)
To verify that the Web site is started by using IIS Manager:
  1. Click Start , click Control Panel , and then click Administrative Tools .
  2. Right-click Internet Information Services (IIS) Manager and select Run as administrator .
  3. In the Connections pane, expand the computer name.
  4. In the Connections pane, click the Sites node.
  5. In Features View , look for the Web site name. The Web site status will be indicated under the Status column. If the Web site is started and is using the HTTP protocol, Started(http) will appear.
Reference LinksEvent ID 5150 from Source Microsoft-Windows-WAS

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.
 Refresh