| Event Id | 4100 |
| Source | tcpip |
| Description | Unable to create device object %2. Initialization failed. |
| Event Information | According to Microsoft : Cause : This event is logged when TCP/IP initialization failed. Resolution : Initialize TCP/IP Refresh the protocol configuration on the network interface by disabling it and then enabling it again. To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority. To disable and then re-enable the network interface: 1.Click Control Panel, double-click Network and Sharing Center, and then click Manage network connections. 2.Right-click the network interface you want to disable, and then click Disable. 3.Right-click the network interface again, and then click Enable. Verify : To perform this procedure, you must have membership in Administrators, or you must have been delegated the appropriate authority. To verify TCP/IP connectivity: 1.Click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. 2.Click Continue when prompted by User Account Control, and then provide the administrator password, if requested. 3.Type ping followed by an IP address of another host on the network. 4.If the ping command succeeds, connectivity is established. |
| Reference Links | Event ID 4100 from Source tcpip |
Catch threats immediately
We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.