| Event Id | 4010 |
| Source | LPDSVC |
| Description | Request from IPAddress could not be satisfied: possibly due to network problems However, when you send a small print job from the same AIX-based computer to the same Windows 2000-based server, the print job may be printed correctly. |
| Event Information | According to Microsoft: CAUSE: This problem occurs because the Windows 2000-based computer uses a time-out period. The time-out period stops the LPD server from waiting for print jobs that are corrupted or that have stopped before being completed. By default, the time-out period is 60 seconds. When the problem that is described in the "Symptoms" section occurs, the AIX-based computer sends a Receive Job command and then creates the print job file. The print job file is then sent to the Windows 2000-based computer. If it takes longer than 60 seconds to create the print job file and send the print job file to the print server, the print job times out. The Windows 2000-based computer then responds with a negative acknowledgement, and the print job is canceled. RESOLUTION: To do this, follow these steps: 1. Click Start, click Run, type regedit, and then click OK. 2. Locate and then click the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LPDSVC\Parameters 3. On the Edit menu, click Add, and then click DWORD Value. 4. Name the new value RecvTimeout. 5. Right-click RecvTimeout, and then click Modify. 6. In the Edit DWORD Value dialog box, click to select the Decimal check box, and then enter a value between 60 and 1200 seconds in the Value data box. 7. Quit Registry Editor. |
| Reference Links | A large print job is not printed when you send it from an AIX-based computer to a Windows 2000-based computer that is running the LPD service |
Catch threats immediately
We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.