Event ID - 3004

Event Id3004
Sourceportmap
DescriptionWindows(R) RPC Port Mapper service has completed starting but has not yet registered any interfaces. Interface registration for IPv6 UDP interfaces is dynamic and is performed as a background operation. These registrations should be completed shortly. An event will be logged when the registration is completed. Until this registration is complete, any Network File System (NFS) clients attempting to use RPC Port Mapper (also known as Portmap and Rpcbind) to discover NFS protocols on this server may be unable to locate the local Server for NFS and so will not be to access any files hosted on this server. If no registrations for the portmap service itself happen within a few seconds, verify that this server is configured properly for networking, stop the RPC Port Mapper service and then restart the Server for NFS manually (which will also start RPC Port Mapper).
Event Information According to Microsoft :

Cause :

This event is logged when Windows(R) RPC Port Mapper service has completed starting but has not yet registered any interfaces.

Resolution :

Configure the computer for networking and restart Portmap

To configure networking and restart the RPC Port Mapper service:
  1. Open Network and Sharing Center in Control Panel.
  2. n the left pane, click Manage network connections .
  3. Configure a new network connection or reconfigure an existing connection to ensure the computer is properly configured for networking.
  4. Open an elevated Command Prompt window. Click Start , point to All Programs , click Accessories , right-click Command Prompt , and then click Run as administrator .
  5. Type net start portmap .
Verify :

To verify the startup status of the RPC Port Mapper service:
  1. Open an elevated Command Prompt window. Click Start , point to All Programs , click Accessories , right-click Command Prompt , and then click Run as administrator
  2. Type devmgmt.msc .
  3. On the View menu, click Show hidden devices .
  4. Expand the Non-Plug and Play Drivers node.
  5. Right-click Server for NFS Open RPC (ONRPC) Portmapper and click Properties .
  6. On the Drivers tab, the Status indicates the current state of the service.
Reference LinksEvent ID 3004 from portmap

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.
 Refresh