Event ID - 2480

Event Id2480
SourceUPS
DescriptionThe UPS driver could not be accessed by the UPS service.
Event InformationExplanation: 
This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The UPS service could not access the UPS driver (UPSDRV.OS2). The UPS driver might not be configured properly. 

Action:
 Be sure that your CONFIG.SYS file has a DEVICE line specifying the location of the UPS device driver and that the /PORT option of that line specifies the serial port that the UPS is connected to. This line must appear before any other lines that install other serial port drivers. If you make changes to Config.sys, you will need to reboot your system for them to take effect.
Reference Links

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.