Event ID - 2250

Event Id2250
SourceMSMQ
DescriptionMessage Queuing will not be able to accept messages temporarily because system paged pool is low. No manual intervention is requried at this stage. Once memory utilization has normalized, Message Queuing will automatically resume accepting messages.
Event Information According to Microsoft :

Cause :

This event is logged when Message Queuing will not be able to accept messages temporarily because system paged pool is low.

Resolution :

Monitor low system resources

Common system resources are almost fully consumed. Message Queuing will not operate properly until system resources are freed up.

We recommend that you monitor the number of messages on your computer and processs these messages. If this issue is persistent, you may have to rearchitect your solution.

To perform this procedure, you must have membership in Administrators , or you must have been delegated the appropriate authority.

To monitor Message Queuing with Performance Monitor:
  1. Open a command prompt. To open a command prompt, click Start . In the search box, type cmd , and then press ENTER.
  2. At the command prompt, type Perfmon , and then press ENTER.
  3. In the console tree, under Monitoring Tools , click Performance Monitor .
  4. Click the green plus sign to add a monitor.
  5. On the Add counters tab, in the Counters section, click MSMQ Service .
  6. Select the appropriate counters that you need.
Verify :

Verify that there is sufficient available memory and disk space.

To perform these procedures, you must have membership in Administrators , or you must have been delegated the appropriate authority.

To verify that there is enough available memory:
  1. Open Task Manager. To open Task Manager, right-click an empty space on the taskbar, and then click Task Manager .
  2. Click the Performance tab.
  3. Verify the CPU Usage is not 100%.
To verify that there is enough available disk space:
  1. Open Windows Explorer.
  2. Right-click the drive where Message Queuing is located, and then click Properties .
  3. Verify that there is available Free space .
Reference LinksEvent ID 2250 from MSMQ

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.
 Refresh