Event ID - 20060

Event Id20060
SourceRemoteAccess
DescriptionThe serial driver could not allocate adequate I/O queues. This may result in an unreliable connection.
Event Information According to Microsoft :

Cause :

This event is logged when the serial driver could not allocate adequate I/O queues.

Resolution :

Allocate adequate I/O queues, add memory, or reduce the number of ports

Possible resolutions:
  • Allocate adequate I/O queues to overcome the connection unreliability.
  • Add memory.
  • Reduce the number of ports being used on a multiport adapter.
To perform this procedure, you must have membership in Administrators , or you must have been delegated the appropriate authority.

To configure ports for remote access:
  1. Open Routing and Remote Access. Click Start , click Run , type rrasmgmt.msc , and then press ENTER.
  2. In the console tree, right-click Ports , and then click Properties .
  3. In the Ports Properties dialog box, click a device, and then click Configure .
  4. In the Configure Device dialog box, do the following:
  • To enable remote access, select the Remote access connections (inbound only) check box.
  • To enable demand-dial routing, select the Demand-dial routing connections (inbound and outbound) check box.
Verify :

You can verify that Remote Access Connection Manager is working by checking the installation or service status.

To check the status of the Remote Access Connection Manager service:
  1. Open Server Manager. Click Start , point to Administrative Tools , and then click Server Manager .
  2. In the navigation pane, double-click Diagnostics , and then click Services .
  3. In the details pane, verify that the Remote Access Connnection Manager service is installed and started.
Note : If the Remote Access Connection Manger service does not appear in the list of services, you might have to repair or reinstall the operating system. If you cannot start the Remote Access Connection Manager service, restart the computer.
Reference LinksEvent ID 20060 from RemoteAccess

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.
 Refresh