| Event Id | 1555 |
| Source | Microsoft-Windows-FailoverClustering |
| Description | Attempting to use IPv4 for '%1' network adapter failed. This was due to a failure to disable IPv4 auto-configuration and DHCP. IPv6 will be used if enabled, else this node may not be able to participate in a failover cluster. |
| Event Information | According to Microsoft : Cause : This event is logged when Attempting to use IPv4 for network adapter failed. Resolution : Review IPv4 configuration and DHCP If you do not currently have Event Viewer open, see "Opening Event Viewer and viewing events related to failover clustering." Using the information in the event message, for the affected adapter, review all IPv4 autoconfiguration settings and DHCP settings. If IPv6 is used, review these settings also. To perform the following procedures, you must be a member of the local Administrators group on each clustered server. Opening Event Viewer and viewing events related to failover clustering To open Event Viewer and view events related to failover clustering: 1.If Server Manager is not already open, click Start , click Administrative Tools , and then click Server Manager . If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue . 2.In the console tree, expand Diagnostics, expand Event Viewer , expand Windows Logs , and then click System . 3.To filter the events so that only events with a Source of FailoverClustering are shown, in the Actions pane, click Filter Current Log . On the Filter tab, in the Event sources box, select FailoverClustering . Select other options as appropriate, and then click OK . 4.To sort the displayed events by date and time, in the center pane, click the Date and Time column heading. Verify : Restart the Cluster service, confirm that the nodes come up successfully and that the clustered networks are functioning. To perform the following procedure, you must be a member of the local Administrators group on each clustered server, and the account you use must be a domain account, or you must have been delegated the equivalent authority. To restart the Cluster service on a node and confirm the status of the nodes and networks: 1.To open the failover cluster snap-in, click Start , click Administrative Tools , and then click Failover Cluster Management . If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue . 2.In the Failover Cluster Management snap-in, if the cluster you want to manage is not displayed, in the console tree, right-click Failover Cluster Management , click Manage a Cluster , and then select or specify the cluster that you want. 3.If the console tree is collapsed, expand the tree under the cluster you want to manage. 4.Expand the console tree under Nodes . 5.Right-click the node that you want to start and then click More Actions . If Stop Cluster Service is available, click it. Otherwise, skip to the next step. 6.Right-click the node that you want to start, click More Actions , and then click Start Cluster Service . 7.Repeat the previous two steps for any other nodes you want to start. 8.Click Nodes and then view the status of the nodes in the center pane. If a node is Up , the Cluster service is started on that node. 9.In the console tree, click Networks and then view the status of the networks. |
| Reference Links | Event ID 1555 from Microsoft-Windows-FailoverClustering |
Catch threats immediately
We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.