| Event Id | 14122 |
| Source | ISA Server |
| Description | A packet filter interface could not be bound. For more information about this event, see ISA Server Help. |
| Event Information | According to Microsoft: EXPLANATION: Packet filtering cannot be enabled on a specific interface. The configuration of the interface might have changed, been enabled or disabled, or a dial-out connection might have been dropped immediately after being connected. USER ACTION: Restart the Firewall and Web Proxy services. In ISA Management, check the system configuration to make sure it is consistent with packet filtering configuration, including the internal network addresses in the Local Address Table (LAT), or run Ipconfig at the command line to check current TCP/IP configuration values. To check the system configuration, in the ISA Management console tree, click Servers and Arrays, click Name, click Network configuration, and then click Local Address Table. This information from some newsgroups may help you: ------------------------------------------------------------------------------ I have experienced this myself. I have found a work around for it since none of the vendors I deal with want to take responsibility for the action. I have SBS2000, BackupExec 8.6 and TrendMicro for SBS2000 installed. What I have found to be the problem in my case is that if I let OfficeScan RealTime Monitor start up automatically, it takes forever for the server to boot up. If I go into services and set it to start manually, it boots up just fine and all I have to do is remember to go in to start the OfficeScan RealTime Monitor. The weird thing is this.If I dont have TrendMicro on, everything boots up. If I take TrendMicro off and then install BackUp Exec 8.6(and 8.5) everything works fine or if I install both Backup Exec 8.6 and TrendMicro and only have one network card in the server everything boots fine. But when I have two network cards and have both Trend and BackupExec on at the same time and forget to tell OfficeScan to start manually..my problem reappears. I have talked to Trend and to BackupExec and to Microsoft about this problem an |
| Reference Links | More Information |
Catch threats immediately
We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.