Event ID - 1306

Event Id1306
SourceBINLSVC
DescriptionThe default Boot Image %1 was not found for architecture %2.
Event Information According to Microsoft :

Cause :

This event is logged when the default Boot Image was not found for architecture.

Resolution :

Specify a default boot image

To perform this procedure, you must either be a member of the local Administrators group or have been delegated the appropriate authority.

To specify a boot image to be selected by default:
  1. Open the Windows Deployment Services MMC snap-in.
  2. Right-click the Windows Deployment Services server, and then click Properties .
  3. On the Boot tab, insert the path to the specified boot file for each architecture.
Note : You can also set the default boot image by running the following from the command prompt: wdsutil /set-server /BootImage:<path> /Architecture:{x86 | x64 | ia64} Verify :

To perform this procedure, you must either be a member of the local Administrators group or have been delegated the appropriate authority.

To verify that the BCD file has been generated correctly and is accessible:
  1. Locate the following file on the Windows Deployment Service server: RemoteInstall\Tmp\<arch>.{<GUID>}.bcd, where <arch> is x86, x64, ia64, or x86x64 and <GUID> is 32 characters. Note : By default, the RemoteInstall folder is on drive C.
  2. In the Command Prompt window, run the following command for the file you located in step 1: bcdedit.exe /enum /all /store: <Drive>:\RemoteInstall\Boot\<arch>\default.bcd. The output should contain the contents of the BCD file.
  3. Verify that the output contains entries for each of your boot images.
Reference LinksEvent ID 1306 from Source BINLSVC

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.
 Refresh