| Event Id | 11 |
| Source | WLBS |
| Description | NLB Cluster %2 %1: Driver could not open device \DEVICE\%3. %4 |
| Event Information | According to Microsoft : CAUSE: Network Load Balancing (NLB) cannot bind to the network adapter. A possible reason is that the medium is not supported. RESOLUTION: Bind NLB to an Ethernet network adapter. If you are already using an Ethernet network adapter, examine the status code of the event message. The returned status code is included in the Data area at the bottom of the Event Properties dialog box. The status code will correspond to a specific error condition as follows: 0xC0010019 = The adapter specified is not supported. In this case, you need to use a different adapter. 0xC000009A = The requested operation failed because NDIS could not allocate sufficient memory or initialize the state it uses to track an open binding. For this status, try adding additional memory. If the status code in the message is not listed here or you cannot resolve the problem based on the information provided, contact your product support person. For more information about product support, see Help. Alternatively, see Product Support Services at http://www.microsoft.com. Under the Resources area in the left pane, point to Support, and then click Support Home. |
| Reference Links | More Information |
Catch threats immediately
We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.