| Event Id | 11 |
| Source | Disk |
| Description | The driver detected a controller error on \Device\Harddisk0\DR0 |
| Event Information | CAUSE : The System log error occurs because, when an I/O request packet (IRP) is correctly canceled, the Usbstor.sys driver cannot translate the cancel operation to a SCSI error, and therefore the operation is marked as an error. The error is not valid, because no data destined for the hard disk drive is lost, and there is no device error. RESOLUTION 2: No action is required. The System log error is informational only and can be safely ignored. The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products. Cause: ATA66 DMA transfer mode is not supported for the onboard IDE controller.This information from some newsgroups may help you: ------------------------------------------------------------------------------ This problem shows itself by freeze behavior and error log entries. The freezing is just that, it will seem fine, then boom, it freezes solid and you cant do jack for a good 40 seconds. Then it unfreezes and comes to life and acts like nothing ever happened. This appears to be the only problem I know about. That is, maybe it causes other problems too? But the freezing is the main end result. And this freezes all activity, not just HDD operations. In other words, if I have an MP3 playing, it freezes silent too. Then starts playing again where it left off when it comes back. Also, during the "freeze", keyboard strokes and possibly mouse movements, are still cached. So when it comes back, letters I was typing will appear, and the cursor will jump around. Lastly, it is extremely random. Sometimes it will freeze many times in a hour. Sometimes it will run good for days. I could be playing a game, or just reading a text file and not doing anything HDD intense. Nothing except the freeze period are timely. I would venture to say that the freeze |
| Reference Links | How to Distinguish a Physical Disk Device from an Event Message System event ID 11 is logged when you cancel an I/O operation to a raw USB 2.0-attached hard disk drive in Windows 2000 Server SP4 Disk Error 11 and ATAPI Error 5 Using DMA Transfer Mode for ATA66 Hard Disk Windows Operating System (Disk) |
Catch threats immediately
We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.