| Event Information | According to Microsoft :
Cause :
This event is logged when an error occurred during processing.
Resolution :
Reinstall the printer driver or change the custom printer mapping file
To resolve this issue, run the printer driver Setup program again to reinstall the printer driver .inf file. If the issue still occurs, and you use a custom printer mapping file to define mappings from client-side to server-side drivers, ensure that the custom printer mapping file is correctly configured by checking the following:- The correct printer mapping .inf file name is specified in the PrinterMappingINFName registry entry.
- The custom printer mapping file contains entries.
- The custom printer mapping file contains correct syntax.
To perform these tasks, refer to the following sections.
Install or reinstall the printer driver on the terminal server
If the printer driver that is installed on the client computer is an OEM driver, and a driver is available from the printer's manufacturer, replace the OEM driver with the driver that is available from the printer manufacturer. If you are installing a third-party driver, make sure that the driver is a Windows Hardware Quality Labs (WHQL) signed driver.
Important : After you install the printer driver, terminal server clients must log off and then log on to the terminal server before the printer driver change takes effect.
To install the printer driver, use either of the following methods.
To perform these procedures, you must have membership in the local Administrators group, or you must have been delegated the appropriate authority.
Method one
Run the printer's Setup program to install the printer driver .inf file on the terminal server.
Method two
To install the driver by using the Add Printer Driver Wizard:- On the terminal server, click Start, click Run, type control printers, and then click OK.
- On the File menu, click Server Properties.
Note : If the File menu is not visible, right-click an empty area of the Printers dialog box, and then click Server Properties. - Click the Drivers tab.
- Click Add, and then follow the instructions in the Add Printer Driver Wizard to install the printer driver .inf file.
Change the custom printer mapping file
To perform this procedure on the terminal server, you must have membership in the local Administrators group, or you must have been delegated the appropriate authority.
To change the custom printer mapping file:
Caution : Incorrectly editing the registry might severely damage your system. Before making changes to the registry, you should back up any valued data.- On the terminal server, make sure that the .inf file name that you specified in the PrinterMappingINFName registry entry of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\Wds\rdpwd subkey is correct.
- To verify the value of the registry entry:
a.On the terminal server, open Registry Editor. To open Registry Editor, click Start, click Run, type regedit, and then click OK.
b.If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue.
c.Locate and then click the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\Wds\rdpwd subkey.
d.Locate the PrinterMappingINFName entry, and then view the value for the entry in the Data column.
e.If the file name is incorrect, right-click PrinterMappingINFName, click Modify, type the correct file name in Value data, and then click OK. - Open the printer mapping .inf file that is specified in the PrinterMappingINFName registry entry. Ensure that the file contains at least one mapping in its printer name mapping section. Also, ensure that the syntax is correct. The mappings should use the following syntax:
"OEM Printer Driver Name" = "Windows Server 2008 Driver Name"
The left side of the equation is the exact name of the printer driver associated with the client-side print queue that is being redirected to the server. The exact name of the printer driver appears on the General tab, next to Model when you view the printer properties on the client computer. (You can also click the Advanced tab and view the driver name in the Driver list.) The right side of the equation is the exact name of the server-side driver equivalent that is installed on the terminal server. - Restart the Print Spooler service on the terminal server for any changes to take effect.
To perform this procedure on the terminal server, you must have membership in the local Administrators group, or you must have been delegated the appropriate authority.
To restart the service:
a.On the terminal server, open the Services snap-in. To open the Services snap-in, click Start, point to Administrative Tools, and then click Services.
b.If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue.
c.In the Services pane, right-click Print Spooler, and then click Restart.
d.Confirm that the Status column for the Print Spooler service displays Started.
Verify :
To verify that printer redirection is working properly, establish a remote session with the terminal server and check that the redirected printer is available and is functioning as expected. |