| Event Id | 110 |
| Source | Removable Storage Service |
| Description | Automatic configuration for library Changer0 failed to configure DriveBay0. The driver for the device in this bay is not properly loaded. |
| Event Information | According to Microsoft: CAUSE: This behavior occurs because RSM can only auto-configure a robotic library when the following conditions are true: 1. The robotic library hardware unit supports drive element address reporting with the ReadElementStatus SCSI command. Contact the manufacturer to find out if your library hardware unit supports this feature. 2. All drives inside the robotic library are on the same SCSI bus as the library itself. 3. The TAPE library is not attached to a Fiber Channel Switch. |
| Reference Links | Removable Storage Manager Reports Automatic Library Configuration Error Messages Tape Autoloader - Installation instructions under Remote Storage Manager |
Catch threats immediately
We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.