Event ID - 1105

Event Id1105
SourceMicrosoft-Windows-FailoverClustering
DescriptionThe Cluster service failed to start because it was unable to register interface(s) with the RPC service. The error code was '%1'.
Event Information According to Microsoft :

Cause :

This event is logged when cluster service failed to start.

Resolution :

Check for conditions preventing Cluster service startup

There are various software or hardware related causes that can prevent the Cluster service from starting on a node. Sometimes the Cluster service can restart successfully after it has been interrupted by one of those causes.

Review the event logs for indications of the problem. A recommended order for troubleshooting is as follows:
  1. Hardware
  2. Operating system
  3. Networking
  4. Security
  5. Cluster service
  6. Clustered applications or services
Although a problem might appear to be related to an application, most often, the problem is related to items 1, 2, 3, or 4 in the preceding list. A useful step is to review the system event log and the cluster diagnostic log file for events that happened around the time of the failure.

If you do not currently have Event Viewer open, see "Opening Event Viewer and viewing events related to failover clustering." If the event contains an error code that you have not yet looked up, see "Finding more information about error codes that some event messages contain."

To perform the following procedures, you must be a member of the local Administrators group on each clustered server, and the account you use must be a domain account, or you must have been delegated the equivalent authority.

Opening Event Viewer and viewing events related to failover clustering

To open Event Viewer and view events related to failover clustering:
  1. If Server Manager is not already open, click Start , click Administrative Tools , and then click Server Manager . If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue .
  2. In the console tree, expand Diagnostics, expand Event Viewer , expand Windows Logs , and then click System .
  3. To filter the events so that only events with a Source of FailoverClustering are shown, in the Actions pane, click Filter Current Log . On the Filter tab, in the Event sources box, select FailoverClustering . Select other options as appropriate, and then click OK .
  4. To sort the displayed events by date and time, in the center pane, click the Date and Time column heading.
Finding more information about the error codes that some event messages contain

To find more information about the error codes that some event messages contain:
  1. View the event, and note the error code.
  2. Look up more information about the error code in one of two ways:
  • Search System Error Codess.
  • Click Start , point to All Programs , click Accessories , click Command Prompt , and then type:
NET HELPMSG errorcode

Verify : Confirm that the nodes are running and that the backup or restore process succeeded.

To perform this procedure, you must be a member of the local Administrators group on each clustered server, and the account you use must be a domain account, or you must have been delegated the equivalent authority.

Viewing the status of the nodes in a failover cluster

To view the status of the nodes in a failover cluster:
  1. To open the failover cluster snap-in, click Start , click Administrative Tools , and then click Failover Cluster Management . If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue .
  2. In the Failover Cluster Management snap-in, if the cluster you want to manage is not displayed, in the console tree, right-click Failover Cluster Management , click Manage a Cluster , and then select or specify the cluster that you want
  3. If the console tree is collapsed, expand the tree under the cluster you want to manage, and then click Nodes .
  4. View the status for each node. If a node is Up , the Cluster service is started on that node.
Another way to view node status is to run a command on a node in the cluster.

Using a command to view the status of the nodes in a failover cluster

To use a command to view the status of the nodes in a failover cluster:
  1. On the node that you are checking, click Start , point to All Programs , click Accessories , right-click Command Prompt , and then click Run as administrator .
  2. Type:
    CLUSTER NODE /STATUS
    If the node status is Up , the Cluster service is started on that node.
Reference LinksEvent ID 1105 from Microsoft-Windows-FailoverClustering

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.