| Event Id | 10128 |
| Source | Winsock |
| Description | Connection timed out. |
| Event Information | According to Microsoft: EXPLANATION: A connect or send request failed because the connected party did not properly respond after a period of time. (The time-out period is dependent on the communication protocol.) USER ACTION: Check that the destination address is a valid IP address. If you used a hostname, check that it resolved to the correct address If the hostname resolution uses a local host table, it is possible you resolved to an obsolete address. Try to ping the hostname. Is a router configured? Check that the router up and running (check by pinging it, and then ping an address on the other side of it) Use the tracert command at the command prompt to determine the path to the destination address and to check that all the routers are functioning. Check your subnet mask. If you do not have the correct subnet mask, your network system might treat a local address as a remote address (so it forwards addresses on the local subnet to the router, rather than broadcasting an ARP request locally), or vice versa. |
| Reference Links | Connection timed out |
Catch threats immediately
We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.