Event ID - 1010

Event Id1010
SourceMSExchange ActiveSync
DescriptionDirect Push has detected that the configuration value for the maximum heartbeat interval is set to a value higher than the maximum allowed value of "%1" seconds. Therefore, the default maximum heartbeat interval of "%2" seconds and the default minimum heartbeat interval of "%3" seconds will be used until the next time that the computer is restarted. To avoid seeing this message in the future, use Internet Information Services (IIS) Manager to correct this configuration. Reset the value to the default, or use another acceptable value.
Event InformationAccording to Microsoft :
Cause :
This Warning event indicates that Exchange Direct Push has detected that the configuration value for the maximum heartbeat interval is set to a value higher than the maximum acceptable value. This can only occur if these settings were manually changed. This configuration is not valid. Exchange ActiveSync reverted to the default values for minimum heartbeat interval and maximum heartbeat interval until a valid configuration is set. The default minimum heartbeat interval is 60 seconds (1 minute). The default maximum heartbeat interval is 3,540 seconds (59 minutes). Exchange ActiveSync will revert to the default settings until the next time that the server that is running Microsoft® Exchange Server is restarted.
It is recommended that you only use non-default values if that has been recommended by Microsoft Product Support Services.
Resolution:
To resolve this warning, manually change the settings to the default settings or other acceptable values:
1.Start Internet Information Services (IIS) Manager.
2.In the console tree, click Web Sites, and then click Default Web Site.
3.Right-click Microsoft-Server-ActiveSync, and then click Properties.
4.On the ASP.NET tab, click Edit Configuration.
5.On theGeneraltab, underApplicationsettings, take one of these steps:
Configure the MinHeartbeatIntervalandMaxHeartbeatInterval settings to match the default values.
Configure values that are not default. When you use values that are not default, you must configure theMinHeartbeatInterval to a value lower than theMaxHeartbeatInterval.You must also configure values in the acceptable range. The acceptable range of values for theMinHeartbeatIntervalis 1 to 3,540. The acceptable range of values for theMaxHeartbeatIntervalis 2 to 3,540.
Reference LinksEvent ID 1010 from Source MSExchange ActiveSync

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.