Event ID - 1002

Event Id1002
SourceIPMIDRV
DescriptionThe IPMI device driver read an administrator supplied parameter that is invalid. The device driver will use a system defined default value in its place.
Event Information According to Microsoft :

Cause :

This event is logged when the IPMI device driver read an administrator supplied parameter that is invalid.

Resolution :

Get an updated BIOS from your hardware platform vendor.

Contact the hardware vendor to get an updated BIOS that supports IPMI registration via a SMBIOS Type38 record.

Verify :

To test that the IPMI driver is functioning correctly, check that it loaded successfully and check that the RequestResponseEx method of the Microsoft_IPMI WMI class returns a CompletionCode of 0 (Command completed normally.)

To check that the driver loaded successfully:
  1. Click on Start , then click on Start Search .
  2. Type Device Manager and click Enter to open the Device Manager window.
  3. Open the System devices node and locate Microsoft Generic IPMI Compliant Device .
  4. Note whether there is an exclamation mark beside the device name. If there is no exclamation mark, the driver has loaded successfully.
Reference LinksEvent ID 1002 from Source IPMIDRV

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.
 Refresh