| Event Id | 10020 |
| Source | Microsoft-Windows-DHCP-Server |
| Description | This computer has at least one dynamically assigned IPv6 address. For reliable DHCPv6 server operation, you should use only static IPv6 addresses. |
| Event Information | According to Microsoft : Cause : This event is logged when the computer has at least one dynamically assigned IPv6 address. Resolution : Configure a static IP address for the DHCP server To perform these procedures, you must be a member of the Administrators group, or you must have been delegated the appropriate authority. To configure TCP/IP for static addressing: 1.At the DHCP server computer, click Start, click Control Panel, double-click Network and Sharing Center, and then click Manage network connections. 2.Right-click the network connection you want to configure, and then click Properties. 3.On the Networking tab, click Internet Protocol Version 6 (TCP/IPv6), and then click Properties. 4.Click Use the following IP address, and then type the IP address, subnet mask, and default gateway. 5.Click Use the following DNS server addresses. 6.In Preferred DNS server and Alternate DNS server, type the primary and secondary DNS server addresses. Verify : To verify that the DHCPv6 service is running: 1.At the DHCPv6 server computer, click Start, click Run, and then type cmd. 2.At the command prompt, type sc queryex dhcp. 3.The DHCPv6 Server service state should be displayed as RUNNING. |
| Reference Links | Event ID 10020 from Microsoft-Windows-DHCP-Server |
Catch threats immediately
We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.