Event ID - 1041

Event Id1041
SourceDHCP Server
Description The DHCP service is not servicing any clients because none of the active network interfaces have statically configured IP addresses, or there are no active interfaces.
Event InformationThe Dynamic Host Configuration Protocol (DHCP) service may not distribute Internet Protocol (IP) addresses or scope options to requesting client computers.
CAUSE:
This behavior can occur because the DHCP server service is not bound to a statically-configured Transmission Control Protocol/Internet Protocol (TCP/IP) adapter, which is usually the internal adapter.

NOTE: If the network cable is not attached to the network, Windows will not allow any service to bind to TCP/IP. 
RESOLUTION:
To resolve this behavior, configure the bindings for the DHCP Server service: 
1) Click Start, point to Programs, click Administrative Tools, and then click DHCP.
2) In the DHCP Console, right-click the server object, and then click Properties.
3) Click the Advanced tab, and then click Bindings.
4) Under Connections and Server Bindings, enable the user interface that is to be used to service DHCP client requests.
5) Click OK, click OK, and then close the DHCP Console.
6) Click Start, point to Programs, click Administrative Tools, and then click Services.
7) Locate and restart the DHCP server service.
Reference LinksDHCP Service Errors 1002 and 1041 May Be Logged in the System Event Log

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.