Event ID - 2481

Event Id2481
SourceUPS
DescriptionThe UPS service is not configured correctly.
Event InformationAccording to Microsoft:
CAUSE:
Your UPS device does not have a low battery signal (or it was disabled) and, instead of handling this properly, the UPS service terminates prematurely. The problem is in the UPS service.
RESOLUTION:
In either case, you should contact Microsoft Product Support Services for an updated UPS.EXE file. If your UPS and Server services are currently paused, restart them by choosing Services from Control Panel.
User Action:
Follow these steps to configure a UPS: 
Click Start, click Settings, and then point to Control Panel.
Double-click Power Options.
Click the UPS tab.
Click Select.
Choose the manufacturer that you wish to configure, and then click Finish.
This message should occur only on a down-level computer. Any action to correct the problem should be performed on that computer. The UPS service could not access the UPS driver (UPSDRV.OS2). The UPS driver might not be configured properly.Be sure that your CONFIG.SYS file has a DEVICE line specifying the location of the UPS device driver and that the /PORT option of that line specifies the serial port that the UPS is connected to. This line must appear before any other lines that install other serial port drivers. If you make changes to Config.sys, you will need to reboot your system for them to take effect.
Reference LinksTerminal Server Error Messages: 2400 to 2499

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.