Event ID - 1037

Event Id1037
SourceMicrosoft-Windows-FailoverClustering
DescriptionThe file system for one or more partitions on the disk for resource '%1' may be corrupt. Run the Validate a Configuration wizard to check your storage configuration. Optionally, you may want to run Chkdsk to verify the integrity of all volumes on this disk.
Event InformationAccording to Microsoft :
Cause :
This event is logged when the file system for one or more partitions on the disk for resource may be corrupt.
Resolution :
Confirm volume integrity
If Chkdsk has been started automatically, we recommend that you allow it to run so that it can correct any problems with the file system. Chkdsk output will be logged to the %ltsystemroot%gt\Cluster\Reports folder. Note that file-system errors might indicate that the hardware is deteriorating.
To view or change the current setting for the triggers for running Chkdsk on a clustered disk, see ""Viewing or changing the setting for the triggers that cause Chkdsk to run on a clustered disk,"" later in this topic.
If you do not currently have Event Viewer open, see ""Opening Event Viewer and viewing events related to failover clustering.""
To perform the following procedures, you must be a member of the local Administrators group on each clustered server, and the account you use must be a domain account, or you must have been delegated the equivalent authority.
Using logs and the clustering validation wizard to gather information about the state of a clustered disk
To use logs and the clustering validation wizard to gather information about the state of a clustered disk:
  1. Scan appropriate event logs for errors that are related to the disk.
  2. Check cables and any related devices on the bus.
  3. To open the failover cluster snap-in, click Start, click Administrative Tools, and then click Failover Cluster Management. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue.
  4. In the Failover Cluster Management snap-in, in the console tree, make sure Failover Cluster Management is selected and then, under Management, click Validate a Configuration.
  5. Follow the instructions in the wizard to specify the cluster you want to test.
  6. On the Testing Options page, select Run only tests I select.
  7. On the Test Selection page, clear the check boxes for Network and System Configuration. This leaves only the tests for Storage and Inventory. You can run all these tests, or you can select only the specific tests that appear relevant to your situation.
    Important : If a clustered service or application is using a disk when you start the wizard, the wizard will prompt you about whether to take that clustered service or application offline for the purposes of testing. If you choose to take a clustered service or application offline, it will remain offline until the tests finish.
  8. Follow the instructions in the wizard to run the tests.
  9. On the Summary page, click View Report.
Running a disk maintenance tool such as Chkdsk on a clustered disk
If you need to run a disk maintenance tool such as Chkdsk on a clustered disk, use maintanence mode to prevent the disk maintenance tool from triggering failover.
To run a disk maintenance tool such as Chkdsk on a clustered disk:
  1. To open the failover cluster snap-in, click Start, click Administrative Tools, and then click Failover Cluster Management. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue.
  2. In the Failover Cluster Management snap-in, if the cluster is not displayed, in the console tree, right-click Failover Cluster Management, click Manage a Cluster, and select or specify the cluster you want.
  3. If the console tree is collapsed, expand the tree under the cluster that uses the disk on which you want run a disk maintenance tool.
  4. In the console tree, click Storage.
  5. In the center pane, click the disk on which you want to run the disk maintenance tool.
  6. Under Actions, click More Actions, and then click Turn On Maintenance Mode for this disk.
  7. Run the disk maintenance tool on the disk.
    When maintenance mode is on, the disk remains online in the cluster, but the disk maintenance tool can finish running without triggering a failover.
  8. When the disk maintenance tool finishes running, with the disk still selected, under Actions, click More Actions, and then click Turn Off Maintenance Mode for this disk.
Viewing or changing the setting for the triggers that cause Chkdsk to run on a clustered disk
Disk resources in a cluster have a private property setting called DiskRunChkDsk that specifies the triggers that will cause Chkdsk to run on the disk.
To view or change the setting for the triggers that cause Chkdsk to run on a clustered disk:
  1. To open an elevated Command Prompt window, on a node in the cluster, click Start, point to All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
  2. Type: CLUSTER RESOURCE /STATUS
  3. In the list of resources, find the name of the disk for which you want to view the setting.
  4. Type the following command, which requests a list of the private properties of the resource: CLUSTER RESOURCE ""DiskResourceName"" /PRIV
  5. In the resulting display, find the value (from 0 through 5) for DiskRunChkDsk.
  6. Compare the value to the following list:
    • 0 The default. If a bit has been set on the disk indicating possible file system inconsistency, or a quick check equivalent to a dir command at the root returns a file system error, runs Chkdsk /f /x.
    • 1 If a bit has been set on the disk indicating possible file system inconsistency, or a check equivalent to a dir /s command at the root returns a file system error, runs Chkdsk /f /x.
    • 2 Whenever the disk is mounted, runs Chkdsk /f /x.
    • 3 When the disk is mounted, runs Chkdsk, unless a bit has been set on the disk indicating possible file system inconsistency, or a quick check equivalent to a dir command at the root returns a file system error. In the latter cases, runs Chkdsk /f /x.
    • 4 No action; Chkdsk is never triggered by the cluster software.
    • 5 Runs a check equivalent to a dir /s command at the root and if a file system error is returned, does not mount the disk. Otherwise, no action is taken.
  7. To change the setting for the disk, run a command of the following form, replacing n with the value you choose from the preceding list: CLUSTER RESOURCE ""DiskResourceName"" /PRIV DISKRUNCHKDSK=n
  8. To confirm the setting, type the following command again: CLUSTER RESOURCE ""DiskResourceName"" /PRIV
Opening Event Viewer and viewing events related to failover clustering
To open Event Viewer and view events related to failover clustering:
  1. If Server Manager is not already open, click Start, click Administrative Tools, and then click Server Manager. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue.
  2. In the console tree, expand Diagnostics, expand Event Viewer, expand Windows Logs, and then click System.
  3. To filter the events so that only events with a Source of FailoverClustering are shown, in the Actions pane, click Filter Current Log. On the Filter tab, in the Event sources box, select FailoverClustering. Select other options as appropriate, and then click OK.
  4. To sort the displayed events by date and time, in the center pane, click the Date and Time column heading.
Reference LinksEvent ID 1037 from Microsoft-Windows-FailoverClustering

Catch threats immediately

We work side-by-side with you to rapidly detect cyberthreats
and thwart attacks before they cause damage.

See what we caught

Did this information help you to resolve the problem?

Yes: My problem was resolved.
No: The information was not helpful / Partially helpful.